What to look for…
Quality is one of the most important features for pit jacks and jacking beams. Look out for a recognised manufacturer with products approved to BS EN ISO 9001:2008. CE marked and warrantied for at least 3 years.
You can put your trust in Majorlift…
Majorlift is British engineered to the most exacting standards from quality materials. The design, manufacturing and customer support processes are approved to BS EN ISO 9001:2008 and CE compliant. The results speak for themselves in increased reliability, longevity and safety.
Pit Mounted Jacks
Fast, efficient, reliable and safe – these units tackle anything and everything up to 20 tonnes. Operational features such as a full 305mm lifting stroke, full lateral ram adjustment and a high-safety twin ram system are backed by proven hydraulics and positive mechanical safety locks.
Lift Mounted Jacks
These provide fast, proven lifting power in the 8 to 12 tonne category. Again, lifting performance is allied with proven safety features. The sliding frame design allows the jacks width to be safely adjusted. Without any performance or safety compromises these jacks can be supplied to fit all makes of four post or most makes of scissor lift.
Floor Transmission Jack
The FTJ1000 has all the qualities you expect from a Majorlift product, it is robust, reliable and safe to use. It also incorporates some very neat design features which make it a must in every garage where there is no available pit, or where there is low roof clearance. Safe to use and easy to position accurately, it is particularly well suited to the removal and fitting of transmissions.
Vertical Transmission Jack
This unit is designed specifically to provide safe, rapid removal and replacement of heavy transmissions. Easy and safe to use by just one mechanic, the units low minimum height (1115mm) and unusually high extended height (2100mm) increase the units flexibility. Stability comes from its wide base spread over four legs.
 |
 |
 |
 |
Accessories & Options
Each commercial pit jack and commercial lift mounted jacking beam is supplied complete with a full set of slip-on adaptors to assist in jacking axles, diffs and chassis etc. Supplied as standard.
Optional Diff Beam
Allows use of both rams to lift maximum loads at one point. Safe working load 20 tonnes.
Spreader Beam
Optional accessory designed to accomodate vehicles with independant front suspension – particularly buses and coaches. When changing springs the vehicle can be jacked on the chasis leaving the axle on the ground. Enables you to reach jacking points beyond the width of your pit.
Optional Double Extension Top Beam
Makes jacking beam suitable for servicing of light vehicles. Class 4 and 7 MOT testing